ARE YOU A MAYOR AND LOOKING TO SOLVE THE PROBLEM OF POOR ROAD CONDITIONS?
This could be the end of potholes! We have the solution for you.
Do poor road conditions annoy your town? Have further potholes been popping over and over again on the roads, posing a safety risk to pedestrians, cyclists and drivers?
Have citizens complained about the poor road conditions? Do they argue that because of the potholes their cars are damaged?
How come that another damage happened on a relatively new bike path?
Has this topic been the subject of discussions in meetings of the council and the municipal board? Is it a burning subject for you?
We have the solution for you. We have developed a unique technology for pothole repairs on asphalt roadways. We offer not only the technology, but also the products which will help you solve this issue for good.
POTOLES OR CHUCKHOLES? DANGER LURKING ON ROADWAYS AND BIKE PATHS
What exactly does a pothole mean?
Potholes belong among asphalt roadway surface faults. They are not only caused by climactic effects, but also loose discipline in following the technological process is at fault.
Potholes are usually formed when temperatures above zero alternate with sub-zero temperatures, and, when due to water freezing inside the cracks and gaps, the impairment of the wear constantly occurs. Due to the traffic load, the impaired asphalt layer is completely damaged and a sharply bordered fault – a pothole – is formed.
A continuous increase in the surface area and depth of these potholes subsequently occurs, as well as expansion to the roadway surface plane, disintegration and wear, or, eventually, the total dissolution of asphalt layers and the roadway.
SO WHAT IS THE MAIN ISSUE OF TODAY’S ROADS IN RELATION TO POTHOLES?
Potholes are repaired only at the moment they turn out to be really dangerous. Especially in winter, repairs are executed on a temporary basis and good permanent repairs are postponed until the amount of defects in one area are so wide that the repair is worthwhile.
By using FUTTEC technology, repairs may be ensured immediately when a problem arises, which guarantees that citizens will be undisturbed when driving through your municipality.
We have a solution for you! FT3 device or System Container
We offer several products using the unique FUTTEC technology to the mayors of towns and cities to help you solve the problem of potholes on the roads.
WHAT PRODUCTS DO WE OFFER:
FT3 device – FT3 device heats up asphalt surfaces and is used to execute the permanent repair of roadways e.g. potholes. Find out more about the FT3 device.
System Container – The system container enables the simple storage and transportation of all the equipment and material required for pothole repairs and other faults using microwave technology. Find out more about the complex container.
Microwave furnace – The FUTTEC microwave furnace is intended for to heat asphalt mixtures by means of microwave technology, which ensures a uniform heating of all of the inserted material without overheating or related asphalt binder degradation. Find out more about the microwave furnace
WHY ARE POTHOLES REPAIRED THIS WAY:
Homogenous surfaces – our special technology will ensure that the new material will merge into the surrounding surface. Neither dangerous unevennesses for drivers nor technologically undesirable cracks are formed, which could significantly reduce the longevity of the repair life cycle.
All year-round repairs – road repairs may be carried out over the whole year and even during the winter.
Independence – we are not dependent on subcontractors, which could clash seasonally, causing shutdowns for hot pre-coated asphalt mixture supplies for permanent repairs. Heat packed blends are directly heated in our microwave oven for the needs of a given repair.
Various types of asphalt roadways – repairs may be executed on asphalt roadways of various sizes (streets, roads, highways, local roads, bike paths, airports, racetracks) as well as in hard-to-reach places (steeper driveways or loading docks).
Different types of damage – FUTTEC technology allows you to repair various types of damage – from small cracks to holes up to 70 x 50 cm – in one step.
Various pavement ages – This technology is particularly suitable for repairing newer roads. Timely road repairs can ensure a long service life.
Repairs are carried out quickly and permanently – a pothole repair is executed by a two-member crew in about an hour following the start of work.
Efficiency – using FUTTEC technology is less demanding in terms of time and energy when compared to other methods of road repairs.. The efficiency saves you financial expenses.
Technical repair certificate – during the repair works, the FT3 device generates a technical repair certificate. This includes information on the time, location and duration of the repair. The protocol is also a guarantee of the quality of the repair.
Online Transparency – The machine allows you to share the technical protocol information online. For example, it can be shared on the web site of the communications administrators.
Environmental protection – ecology matters to us. We do not remove unnecessary material around the pothole. The material intended for repairs is heated up just before it is used, thus heat losses do not occur. We use only the indispensable amount of mixture for repairs.
Unique know-how – the advanced FUTTEC technology represents a high-quality approach to pothole repairs and presents a solution to a problem which annoys citizens throughout the world.
Find out more in the about us section.
Would you like to know more? Contact us.